the rate of discharging curve is different, the inner resistance is totally different either. your data isn't sufficient, what sort of battery it's ,what is the mannequin ,what's the amount ,seriese or parallel.

With excessive quantity, any reasonable dimension may be produced economically. The dry polymer design provides simplifications with respect to fabrication, ruggedness, security and thin-profile geometry.

Yes I find out about standby electrical fuel/ gasoline mills… however for some purpose this isn't a solution. An ideal battery… questionable, for the moment in small apliances sure, in subsequent years of course not. Lightweight - gelled electrolytes enable simplified packaging by eliminating the metallic shell. Flexible form factor - producers aren't certain by normal cell formats.

With a cell thickness measuring as little as one millimeter (0.039 inches), tools designers are left to their very own creativeness in terms of form, form and size. Relatively low self-discharge - self-discharge is lower than half that of nickel-based batteries. This leads to a Lithium Ion battery that's as shut as attainable to a ‘drop-in alternative’ for lead-acid, so long as the above issues are stored in mind. When considering replacing an current lead-acid battery bank by a Lithium Ion battery bank one must take a few things into consideration. Although the term ‘drop-in replacement’ is often used on this case, it's truly by no means so simple as that.

the protector inner the battery is written in unique information. I think the battery of different kinds cannot be crossed used.