If you could have a Sterling DC to DC charger For a 6 x100 BB battery bank will it trigger injury? I know it's going to take longer to charge, however want to make sure it won’t damage the batteries. Most of the time whether it is heat I might be plugging in at night and the Victron Multiplus 3000 can cost the batteries. I am taking a look at sterling power 30 and 60 amp dc to dc chargers.
Advantages or disadvantages to either with your batteries. The resting voltage of a fully charged Battle Born Battery is thirteen.5 to 13.6 volts. You may wish to contact the producer of your other lithium battery to see if it is the identical per their specs.
What you gave me is the prismatic cell which I doubt can supply 600A for beginning a automobile. Yeah I'll talk to tommy L to see the way it works for his buyer. I think as of now the one route is the balancer hooked up because I hate to steadiness charge it one a month or so. But them the balancer so suck some vitality so I would want to drive it at least once a month to charge the battery over what the balancer used. The voltage output of the alternator is designed to swimsuit the unique lead acid chemistry that was in the automotive.
But one factor all of them have in common is that they weigh lower than lead-acid. That mentioned, lead-acid batteries still dominate the marketplace for massive, highly effective batteries found in motorcycles, boats, cars, and RVs. If so this Means the alternated can let the battery drain to 2.25V before charging it.
Recently installed my 2 100AH Battleborn Batteries in my RV and programmed my solar and inverter/charger to your beneficial specs. In case you missed my earlier publish, concerning the low temp disconnect of the interior BMS. The Victron MPPT charge controllers let you set the absorption time(and voltage 14.4v) to the specified level. In the case with our lithium batteries its about 20 minutes per battery.